【3C產品】Mobikoma概念手機－分享●好設計

Mobikoma是一款概念手機，由許多小塊的模件扣緊連接而成。每一個小方塊都有獨立電源和計算處理器，因此是強大的單獨物件。其原本的目的是將全部小方塊組合成手機，但也可看自己的心情將它們變成小型的平板。具體而有兩個比較特別的小方塊，設有SIM卡和麥克風，可藉由它們背後的圖樣來區分。

建議與說明：

ž 經由這些方塊你可以設計迷你手機，尺寸可為22mm x 44mm x 6mm
ž 主要的方塊才有相關程式的按鍵
ž 其他則沒有
ž 側面的中間有小孔洞
ž 觸控螢幕則需要透過特殊的轉接器以熱能和動能來幫助充電
ž 你可以另外設計你所需要的新形式
ž 連結起來後，可利用別針或類似的東西插入小孔使它們分離
ž 這款平板擁有各類無線通信（WI-FI）
ž 最大尺寸可達1.5m x 2m

Tablet Phone or Phone Tablet – You Decide

Mobikoma is a concept phone based on modules that fasten on to each other via micro locks. Each module has its own power supply and computing processor making it a powerful individual. However the purpose is to use them collectively as a phone and if you’re in the mood for it, a mini tablet. There are two specific elements dedicated to the SIM storage with phone memory and microphone. These elements are distinguished with their fancy etchings on the back.

Proposed Specs

ž From two of these concept elements you can design mini cell phone sized 22mm x 44mm x 6mm.
ž On the key elements there are programmed buttons.
ž Other elements are without buttons.
ž On the lateral surfaces in the middle of the fixing tape there are apertures.
ž The locks of elements become apart after pushing by pin or similar subject in these apertures.
ž You can design a new needed form from these elements.
ž The touch screen needs thermal and kinetic operator energy for charging with the help of special adapter.
ž This tablet has all kinds of wireless communication (wi-fi).
ž Maximal size can be 1.5m x 2m.
ž 54 elements – the tablet computer
ž 2 elements – little cell phone
18 elements – cell phone – backside
Designer: Kamil Izrailov